The guide to solar panels can help choose the right panel for you. This guide contains sections on the different solar panels (60-cell and 72-cell), financing and where to place your panels. It will also walk you through the solar installation process. This guide is a valuable resource for homeowners in Florida that are interested in solar energy.
60-cell panels vs 72 cell solar panels
If you're looking to install solar panels on your roof, you'll need to choose between 60-cell and 72-cell models. Both have their advantages and disadvantages. A panel with 72 cells will deliver more power to your system. Typically, a 72-cell panel is cheaper than a 60-cell one.
One of the largest differences between these solar panel types lies in their size. A 72-cell panels is about one-third the length and three-quarters of an inch wider than a 60'-cell panel. These panels measure approximately three-feet by six inches. However, it is a bit harder to move around and may require two people to install it. A 60-cell panel however, is smaller and can be handled more easily. If you intend to install solar cells on your house, most solar installers will recommend the 60-cell panel.
Solar panels at a cost
A great way to save money on your electricity bills is to invest in solar panels. A standard-sized system can cut homeowners' monthly electricity bills up to 50%. This can add up to more than $30,000 in savings over the life of the solar panel system. Solar panels are becoming more affordable because of federal tax incentives. Solar purchase power agreements are offered by some companies. These agreements allow you to buy solar panels with very little or no money down, and then immediately get the utility savings. A lower utility bill can help increase the value and appeal of your home.
The price of solar panels varies depending on what size you require. Prices include installation, permits inspection, interconnection, and maintenance. Sometimes, you may need to pay labor for solar panel installation.
Certification of solar panels
Solar panels can be certified according to a variety of standards. In Europe, the panels must have the CE (Conformity Mark) mark, which means they conform to EU safety, health, and environmental standards. A US solar panel must carry the UL mark (Underwriters Laboratories), CSA (Conformity Standards Association), which indicates that it has been independently tested for safety.
If the manufacturer doesn't give you a certificate for the solar panel, you can contact them and request one. Many of these companies have certification programs. Some are state-mandated, while others are voluntary. You can trust many solar panel companies. However, you should ask them to provide documentation to support their certification.
Locate a sunny spot for solar panels
To maximize the energy produced by your solar panels, it is important to determine their direction. The ideal direction is generally south, but this can vary depending on your geographic location. The sun rises or sets in different directions all over the globe. The position of the sun in relation to your panels can also influence the direction of your array.
If you are installing solar panels, it is important to align the latitude of your house with the latitude at which the sun shines. If your array is located in Alaska, for example, mount it at a 30- to 40 degree angle. The angle will depend upon your latitude. However the higher the production, the steeper you should mount it.