A solar panel installation can be a great way of reducing your dependence on fossil fuels. It is essential that you set up the system correctly. It is best to hire a professional to do the job. They'll be able to make sure that you don't have any safety issues and that the system is set up correctly.
Before you start installing solar panels, you need to make sure that your roof can withstand the weight. A roofing contractor may be needed to inspect your roof. This may take several weeks. You will need to establish a schedule for the installation of the panels to your roof.
It's not enough to check your roof. Also, make sure you have an electric plan and mounting structure. A solar panel installation isn't as difficult as you might think. Most residential homeowners install panels on their roofs. In order to be safe while working, you'll need to put up scaffolding.
Before you start your solar panel installation, check with your state's electrical board to see if you require a license. Find a professional solar installer if your state requires it. Ask them about their experience, and how they calculate the number of panels that you will need. You can compare prices to find the best deal by getting multiple quotes.
Mounting your panels is only part of the job. You'll need to connect them with your house's interior control panel. Installing a fuse combiner will allow you to wire your panels together. A breaker panel and a backfeed breaker will also be required. This will allow your system to feed power into your local utility grid. You may also have to rewire a few circuits.
You will need to test every wire once your solar panels are installed. Also, make sure you are not short-circuiting the batteries. You can check this with a meter. If there are any problems, tighten the terminals.
When you're installing your solar panels, you'll need to make sure that you follow the manufacturer's instructions. If you don't follow these instructions, you could end up with a power leak. Also, it is important to insulate the panels to prevent power leaks.
It is important to ensure that the panels don't lift when you install them. Mounting the panels with bolts or brackets is the best way to accomplish this. If you don’t have mounting brackets, a flashing-based mounted will work. It supports the panels and tracks sunlight. Mounts should be placed every four feet. A ground framework is a way to install solar panels but still function as a mount. However, it's best to install these mounts on a ground that's not obstructed by trees or other objects.